Specs of LANPWR S2500 2500W Portable Power Station |
Item |
Standards |
Max |
Remark |
Battery Type |
45AH |
--- |
LiFePO4,14 series 3 parallel single 15AH |
Rated Voltage |
44.8V |
--- |
14s |
Battery Capacity |
2016WH |
--- |
Depends on the capacity of a single cell |
Rated Output Power |
2500W |
|
|
Input Voltage Range |
100V |
110V |
|
Input Frequency Range |
50HZ |
63HZ |
Under frequency stop charging |
Input Surge Current |
|
20A |
|
Constant Charging Power |
1300W |
1500W |
|
Charging Power Switching |
|
1300W |
|
Charging Cut-off Power |
|
70W |
|
UPS Mode |
Load <2000W long-term work |
|
UPS mode load load < 2000W, long-term work, and continuous 100W charging, switching time 10MS |
EPS Mode |
Load <2500W long-term work |
|
EPS mode load load < 2500W long-term work, total input ≤ 1500W. When the load power is 1000W, the charging power is 500W |
USB-A Output |
USB-A QC3.0 *3: 5V, 3.37A; 9V,2.00A; 12V,1.5A |
18W Max per port |
|
USB-C Output |
PD100W*3: 5V,3A; 9V,3A; 12V,3A; 15V,3A; 20V, 5A |
100W Max per port |
|
PPS output voltage range |
|
20V |
|
Car Charging |
Support |
|
12V charging current is 10A, over 15V, charging current is 20A |
MPPT Solar Charging |
Support |
|
Supports up to 700W solar charging |
Output Waveform |
Pure Sine Wave |
|
Rated resistive load |
AC Charging and Discharging |
Support |
|
|
Overload Protection |
2650W |
2700W |
When the output is overloaded, it will work for about 5 seconds, and the buzzer will stop to prompt a continuous alarm sound and the screen will display |
50 seconds automatic shutdown |
Fan on Temperature |
60℃ |
65℃ |
After the temperature of the heat sink reaches this range, turn on the fan and the screen will display |
Fan off Temperature |
45℃ |
50℃ |
After the heat sink temperature reaches this range, turn off the fan |
Charging Power Error |
5% |
7% |
The error is too large and needs to be controlled within 3% |
Discharge Power Error |
5%
|
|
|